Categories > Cable lugs > Pre-insulated terminals and connectors > Tube terminals >

ANE-M RING TERMINAL

RING TERMINAL, PRE-INSULATED WITH PA 6.6, FOR COPPER CONDUCTORS

Gallery

ANE-M

RING TERMINAL, PRE-INSULATED WITH PA 6.6, FOR COPPER CONDUCTORS

Documentation

Instructions (pdf)

Certifications & approvals

UL (cULus)

Description

ANE-M series lugs are manufactured from electrolytic Copper tube with a purity greater than 99.9%, annealed and Tin plated. The interior of the PA6.6 insulated sleeve is funnel shaped so as to ensure complete and easy introduction of the conductor strands. It also eliminates the need to insulate the terminal using either tape or heat shrinkable tubing. Furthermore the PA6.6 sleeve avoids the possibility of conductor breakage at the barrel entrance.

Read all Close

Common features in table.

Features

Details by type in expandable section below.

Technical information
Material composition and treatments
Classification and data ordering

Minimum operating temperature

-20 °C

Maximum operating temperature

115 °C

Threshold of operating temperature for short periods

130 °C

Spy hole

Yes

Number of holes on the palm

Insulated cover color

black

Type of insulation

partial

Easy insertion input

Yes

Surface treatment

tin plating

Compatible cable class

5 and 6 class, CEI 20-29

Conductor body material

Rame elettrolitico con purezza superiore al 99,95%

Insulated cover material

Polyamide PA6.6

Annealing

Yes

Customs code

85369010

ANE2-M

Range of cable cross section (flexible) [mm²] 10

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant
ANE2-M4	indent; radial	M4	4.3	10	4	5	18.5			35.5	8	21	8	9.5	4.6	9	100	500	Yes
ANE2-M5	indent; radial	M5	5.3	10	6	6.5	20			39	8	21	8	9.5	4.6	9	100	500	Yes
ANE2-M6	indent; radial	M6	6.4	11	6	7	20.5	5	7	39.5	8	21	8	9.5	4.6	9	100	500	Yes
ANE2-M8	indent; radial	M8	8.4	15	8	9	22.5	10	20	43.5	8	21	8	9.5	4.6	9	100	500	Yes
ANE2-M10	indent; radial	M10	10.5	18	10	11	24.5	20	35	47.5	8	21	8	9.5	4.6	9	100	500	Yes
ANE2-M12	indent; radial	M12	13.2	19	12	14	27.5	40	50	52.5	8	21	8	9.5	4.6	9	100	500	Yes

ANE3-M

Range of cable cross section (flexible) [mm²] 16

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant	UL standard
ANE3-M4	indent; radial	M4	4.3	11.5	4	5	21.5			38.6	11.5	24	9.2	10.5	5.8	13	100	400	Yes
ANE3-M5	indent; radial	M5	5.3	11.5	6	6.5	23			42.1	11.5	24	9.2	10.5	5.8	13	100	400	Yes	UL486A-486B
ANE3-M6	indent; radial	M6	6.4	11.5	6	7	23.5	5	7	42.6	11.5	24	9.2	10.5	5.8	13	100	400	Yes	UL486A-486B
ANE3-M8	indent; radial	M8	8.4	15	8	9	25.5	10	20	46.6	11.5	24	9.2	10.5	5.8	13	100	400	Yes
ANE3-M10	indent; radial	M10	10.5	18	10	11	27.5	20	35	50.6	11.5	24	9.2	10.5	5.8	13	100	300	Yes
ANE3-M12	indent; radial	M12	13.2	20	12	14	32	40	50	57.1	11.5	24	9.2	10.5	5.8	13	100	300	Yes

ANE5-M

Range of cable cross section (flexible) [mm²] 25

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant	UL standard
ANE5-M4	indent; radial	M4	4.3	14	4	5	24			41	10.5	25	11.1	13	7	12	100	300	Yes
ANE5-M5	indent; radial	M5	5.3	14	6	6.5	25.5			44.5	10.5	25	11.1	13	7	12	100	300	Yes
ANE5-M6	indent; radial	M6	6.4	14	6	7	26	5	7	45	10.5	25	11.1	13	7	12	100	300	Yes
ANE5-M8	indent; radial	M8	8.4	15	8	9	28	10	20	49	10.5	25	11.1	13	7	12	100	300	Yes	UL486A-486B
ANE5-M10	indent; radial	M10	10.5	18	10	11	30	20	35	53	10.5	25	11.1	13	7	12	100	200	Yes	UL486A-486B
ANE5-M12	indent; radial	M12	13.2	21	12	14	33	40	50	58	10.5	25	11.1	13	7	12	50	200	Yes

ANE7-M

Range of cable cross section (flexible) [mm²] 35

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant
ANE7-M6	indent; radial	M6	6.4	17	6	7	28.5	5	7	51	13.2	30.3	13.6	15.5	8.9	15	50	100	Yes
ANE7-M8	indent; radial	M8	8.4	17	8	9	30.5	10	20	55	13.2	30.3	13.6	15.5	8.9	15	50	100	Yes
ANE7-M10	indent; radial	M10	10.5	19	10	11	32.5	20	35	59	13.2	30.3	13.6	15.5	8.9	15	50	100	Yes
ANE7-M12	indent; radial	M12	13.2	21	12	14	35.5	40	50	64	13.2	30.3	13.6	15.5	8.9	15	50	100	Yes

ANE10-M

Range of cable cross section (flexible) [mm²] 50

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant	UL standard
ANE10-M6	indent; radial	M6	6.4	19	7	8	30.5	5	7	53	16.5	30.5	13.8	15.8	10	19	50	150	Yes	UL486A-486B
ANE10-M8	indent; radial	M8	8.4	19	8	9	32.5	10	20	55	16.5	30.5	13.8	15.8	10	19	50	150	Yes
ANE10-M10	indent; radial	M10	10.5	20	9.5	11.5	35	20	35	59	16.5	30.5	13.8	15.8	10	19	50	150	Yes	UL486A-486B
ANE10-M12	indent; radial	M12	13.2	21	12	12	35.5	40	50	62	16.5	30.5	13.8	15.8	10	19	50	150	Yes

ANE14-M

Range of cable cross section (flexible) [mm²] 70

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant
ANE14-M6	indent; radial	M6	6.4	21	7	8	37	5	7	61	18	36.1	15.8	18	11.3	20	25	75	Yes
ANE14-M8	indent; radial	M8	8.4	21	8	9	38	10	20	63	18	36.1	15.8	18	11.3	20	25	75	Yes
ANE14-M10	indent; radial	M10	10.5	21	10	11	40	20	35	67	18	36.1	15.8	18	11.3	20	25	75	Yes
ANE14-M12	indent; radial	M12	13.2	22	12	14	43	40	50	72	18	36.1	15.8	18	11.3	20	25	75	Yes
ANE14-M14	indent; radial	M14	15	25	14	16	45	65	70	76	18	36.1	15.8	18	11.3	20	25	100	Yes

ANE19-M

Range of cable cross section (flexible) [mm²] 95

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant	UL standard
ANE19-M8	indent; radial	M8	8.4	25	8	9	44.5	10	20	73	22.5	43.5	18	20.5	13.5	25	25	50	Yes	UL486A-486B
ANE19-M10	indent; radial	M10	10.5	25	10	11	46.5	20	35	77	22.5	43.5	18	20.5	13.5	25	25	50	Yes
ANE19-M12	indent; radial	M12	13.2	25	12	14	49.5	40	50	82	22.5	43.5	18	20.5	13.5	25	25	50	Yes
ANE19-M14	indent; radial	M14	15	25	14	16	51.5	65	70	86	22.5	43.5	18	20.5	13.5	25	25	50	Yes
ANE19-M16	indent; radial	M16	17	27	16	18	53.5	90	90	90	22.5	43.5	18	20.5	13.5	25	25	50	Yes

ANE24-M

Range of cable cross section (flexible) [mm²] 120

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant
ANE24-M10	indent; radial	M10	10.5	28.5	10	11	48	20	35	77.7	24	42.75	20	22.7	15.2	27	25	50	Yes
ANE24-M12	indent; radial	M12	13.2	28.5	12	14	51	40	50	82.7	24	42.75	20	22.7	15.2	27	25	50	Yes
ANE24-M14	indent; radial	M14	15	28.5	14	16	53	65	70	86.7	24	42.75	20	22.7	15.2	27	25	50	Yes
ANE24-M16	indent; radial	M16	17	28.5	16	18	55	90	90	90.7	24	42.75	20	22.7	15.2	27	25	50	Yes

ANE30-M

Range of cable cross section (flexible) [mm²] 150

	Technical information	Weight and dimensions															Logistic		Certifications
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	Cable stripping length [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	ROHS compliant
ANE30-M12	indent; radial	M12	13.2	31.5	14	16	61	40	50	101	26.5	52.2	23	26.6	16.7	30	10	20	Yes
ANE30-M14	indent; radial	M14	15	31.5	16	18	63	65	70	105	26.5	52.2	23	26.6	16.7	30	15	30	Yes
ANE30-M16	indent; radial	M16	17	31.5	17	19	64	90	90	107	26.5	52.2	23	26.6	16.7	30	15	30	Yes
ANE30-M20	indent; radial	M20	21	31.5	20	22	67		150	113	26.5	52.2	23	26.6	16.7	30	15	30	Yes

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. * *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Panel plates type to print (select the Type from catalog)*

Panel plates type*

Panel plates color (select color from catalog)*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colours (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note