Lang zh_CN
  • en
  • en_US
  • it
  • fr
  • de
  • es
  • zh_CN
Country Italy
  • Italy
  • Usa / Canada / Mexico
  • France
  • Germany
  • UK / Ireland
  • Other countries
  • Spain
Lang zh_CN
  • en
  • en_US
  • it
  • fr
  • de
  • es
  • zh_CN
Country Italy
  • Italy
  • Usa / Canada / Mexico
  • France
  • Germany
  • UK / Ireland
  • Other countries
  • Spain

MBS-C

FUSABLE SCREW MECHANICAL JOINTS, FOR LOW AND MEDIUM VOLTAGE, FOR AL/CU CONDUCTORS
Description
MBS-NC series mechanical screw fuse joints are the ideal choice for indoor, outdoor and underground jointing of aluminum or copper low and medium voltage conductors up to 52 kV. The inner surface is protected from oxidation by a special high drop point grease, while the outer surface is made chemical resistant by electrolytic tinning with a minimum thickness of 12 μm. The fusible screws are made of the same material as the joint body and are designed to be screwed in, using a standard wrench, until they break inside the threaded hole, resulting in no protruding threads and an improved connection. To avoid dielectric stresses, medium-voltage connectors are equipped with centering devices designed to ensure proper alignment of the various conductor sections within the joint.
Read all Close

Features
  • 技术信息
  • 材质和处理
  • 重量和尺寸
  • 包装信息
  • 类别和数据排列
最低工作温度
-50   °C
最高工作温度
150   °C
存在中央停止块
Yes
最高工作电压
52000   V
端子接驳片内存在油脂
Yes
固定件数量
4
固定件的紧固扭矩
35   Nm
导体材质
纯度高于 99.5 % 的铝
导体表面处理最小厚度
12   µm
导体表面处理
镀锡
固定件材质
定心器材质
聚酰胺 PA6
固定件扳钳尺寸
22   mm
电缆截面范围
50 ÷ 240   mm²
总长度
124   mm
端子接驳片内径
20.5   mm
电缆剥皮长度
72   mm
端子接驳片外径
35   mm
最小包装单元
1   PCE
标准包装单位
20   PCE
海关编码
85369010

MBS-C
技术信息 重量和尺寸 认证
tipo
tipo
连接类型
连接类型
紧固件的几何形状
紧固件的几何形状
表面处理
表面处理
接驳片内侧最大直径 [mm]
接驳片内侧最大直径 [mm]
接驳片内侧最小直径 [mm]
接驳片内侧最小直径 [mm]
符合ROHS标准
符合ROHS标准
MBS50-240C butt connector hex socket wrench 20.5 20.5 Yes
MBS50-240NC 平行直通接头 六角扳手 镀锡

Follow us

Subscribe to CEMBRE newsletter and stay tuned

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

2. Company data

3. Print type

4. Label specs

Orientation

Label size

A x B mm

5. Graphic specs

Graphic size

H x W mm

Graphic position

X x Y mm

6. Request data