Public transport and goods

9110

SPLIT BUSHING FOR CIRCULAR SPLIT CABLE ENTRY SYSTEMS, IN POLYAMIDE PA6

AA-M

MONOMETAL RING TERMINAL, FOR ALUMINUM CONDUCTORS

ANL

POLYESTER ALPHANUMERIC LABEL

CA-2M

RING TERMINAL FOR MEDIUM VOLTAGE, 2 HOLES, FOR COPPER CONDUCTORS

CY

SHORT RANGE BROACH CUTTERS, TIN COATED, FOR RAIL DRILLING MACHINES

DBG-UIC33

Over rail clamp

ETF-ROLL-SBS

TIE-ON CABLE TAGS, PRE-CUT, WITHOUT HOLDER, STYRENE-BUTADIENE-STYRENE, WITHOUT HOLDER, HALOGEN FREE

G

CABLE TIE, IN POLYAMIDE PA6.6

HR

RING TERMINAL, FOR COPPER CONDUCTORS

KIT-B1300-C-1

KIT COMPOSED BY HYDRAULIC CRIMPING TOOL B1300-C + SELECTION OF DIES

KIT-B1300-C-2

KIT COMPOSED BY HYDRAULIC CRIMPING TOOL B1300-C + SELECTION OF DIES

KIT-B1300-C-MK

KIT COMPOSED BY HYDRAULIC CRIMPING TOOL B1300-C + SELECTION OF DIES

KIT-B500-1

KIT COMPOSED BY HYDRAULIC CRIMPING TOOL B500 + SELECTION OF DIES

KIT-HT51-2

KM-ROLL-PO

ADHESIVE CABLE MARKERS, PRE-CUT, ON ROLL, IN POLYOLEFIN, SILICONE FREE, HALOGEN FREE

MG-CPM

MG-CPM terminal block markers are available in versions to suit the particular clip formats of the most widely used products. Depending on type, markers are presented as joined strips at a set or flexible pitch or as separate markers for convenient individual insertion on mixed pitch terminal block assemblies. MG-CPM markers provide an elevated mechanical robustness, high dimensional stability and are Halogen Free. Printing a complete sheet of MG-CPM markers on MARKINGENIUS® thermal transfer printers takes around 10 seconds, while to optimise application time, additional data - job details, location, etc - may be printed on the stems. Part-used sheets are easily accommodated to avoid wastage. MG-CPM terminal block markers are available in versions to suit the particular clip formats of the most widely used products.

MG-KMP

ADHESIVE CABLE MARKERS, ON SHEETS, PRE-CUT, IN POLYOLEFIN, SILICONE FREE, HALOGEN FREE

MG2-TCT

ML-C

MECHANICAL FUSE SCREW TERMINALS WITH SYMMETRIC FITTING, FOR MEDIUM VOLTAGE, FOR AL/CU CONDUCTORS

MS-LH

MST-LSB

Composed of the mandatory symbols and with possible integration of informative text. Available in different formats, they enable detailed and effective reporting of equipment, machinery and facilities.

MST-PSW

Composed of the mandatory symbols and with possible integration of informative text. Available in different formats, they enable detailed and effective reporting of equipment, machinery and facilities.

MTA-C

ALUMINUM/COPPER BIMETAL RING TERMINAL, WITH TANG CONNECTION, FOR ALUMINUM CONDUCTORS

PM

HOLDERS, PLASTICIZED PVC, FOR RIGID TAGS AND CABLE MARKERS

PM-ET

Tie on (tie width max 6 mm) for longitudinal mounting on cables, hoses, tubes and conduit.