Categories > Cable lugs > Non-insulated > For copper cables >

T-L RING TERMINAL

RING TERMINAL, 90° BEND, FOR COPPER CONDUCTORS

Gallery

T-L

RING TERMINAL, 90° BEND, FOR COPPER CONDUCTORS

Description

T-L series 90° bent crimping terminals are made with electrolytic copper pipe of more than 99.9% purity. Due to the process of annealing and electrolytic tinning, the connectors are easier to compress and more resistant to mechanical stress. In addition to chamfer and inspection hole, the collar is provided with a special flared inlet to facilitate insertion of the conductor into the terminal and to prevent stretching of the elementary wires. The length of the collar is such as to facilitate the introduction of the lug into the tool dies, thus simplifying wiring operations.

Read all Close

Common features in table.

Features

Details by type in expandable section below.

Technical information
Material composition and treatments
Classification and data ordering

Minimum operating temperature

-50 °C

Maximum operating temperature

150 °C

Spy hole

Yes

Bend angle of the connection

90 °

Number of holes on the palm

Easy insertion input

Yes

Surface treatment

tin plating

Conductor body material

Rame elettrolitico con purezza superiore al 99,95%

Annealing

Yes

Customs code

85369010

T6-L

Range of cable cross section (flexible) [mm²] 4 ÷ 6

Range of cable cross section (low stranded) [mm²] 4 ÷ 6

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T6-L6	hexagonal; indent	M6	6.4	13	8	9	5	7	14.5	3.3	16	5.6	100	800

T10-L

Range of cable cross section (flexible) [mm²] 10

Range of cable cross section (low stranded) [mm²] 10

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T10-L6	hexagonal; indent	M6	6.4	11	8	9	5	7	14.5	4.2	16	6.8	100	800
T10-L8	hexagonal; indent	M8	8.3	14	10	11	10	20	14.5	4.2	16	6.8	100	800

T16-L

Range of cable cross section (flexible) [mm²] 16

Range of cable cross section (low stranded) [mm²] 16

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T16-L6	hexagonal; indent	M6	6.4	12	8	9	5	7	17	5.3	19	8	100	100
T16-L8	hexagonal; indent	M8	8.3	16	10	11	10	20	17	5.3	19	8	100	400
T16-L10	hexagonal; indent	M10	10.3	16	12	14	20	35	17	5.3	19	8	100	400

T25-L

Range of cable cross section (flexible) [mm²] 25

Range of cable cross section (low stranded) [mm²] 25

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T25-L10	hexagonal; indent	M10	10.3	16	10	14	20	35	17	6.6	19	9.5	100	400
T25-L6	hexagonal; indent	M6	6.4	13	6	9	5	7	17	6.6	19	9.5	100	400
T25-L8	hexagonal; indent	M8	8.3	16	8	11	10	20	17	6.6	19	9.5	100	400

T35-L

Range of cable cross section (flexible) [mm²] 35

Range of cable cross section (low stranded) [mm²] 35

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T35-L6	hexagonal; indent	M6	6.4	15	8	9	5	7	18	7.9	20	11	50	400
T35-L8	hexagonal; indent	M8	8.3	17	10	11	10	20	18	7.9	20	11	50	200
T35-L10	hexagonal; indent	M10	10.3	17	12	14	20	35	18	7.9	20	11	50	200

T50-L

Range of cable cross section (flexible) [mm²] 50

Range of cable cross section (low stranded) [mm²] 50

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T50-L6	hexagonal; indent	M6	6.4	18	8	9	5	7	22.5	9.2	25	12.5	25	100
T50-L8	hexagonal; indent	M8	8.3	18	10	11	10	20	22.5	9.2	25	12.5	25	200
T50-L10	hexagonal; indent	M10	10.3	18	12	14	20	35	22.5	9.2	25	12.5	25	100

T70-L

Range of cable cross section (flexible) [mm²] 70

Range of cable cross section (low stranded) [mm²] 70

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T70-L8	hexagonal; indent	M8	8.3	21	10	11	10	20	19	11	21	15	25	100
T70-L10	hexagonal; indent	M10	10.3	21	12	14	20	35	19	11	21	15	25	100
T70-L12	hexagonal; indent	M12	12.8	21	16	18	40	50	24	11	27	15	25	100

T95-L

Range of cable cross section (flexible) [mm²] 95

Range of cable cross section (low stranded) [mm²] 95

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T95-L10	hexagonal; indent	M10	10.3	23	12	14	20	35	28	13.1	31	17	25	100
T95-L12	hexagonal; indent	M12	12.8	23	16	18	40	50	28	13.1	31	17	25	100

T120-L

Range of cable cross section (flexible) [mm²] 120

Range of cable cross section (low stranded) [mm²] 120

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T120-L10	hexagonal; indent	M10	10.3	28	12	14	20	35	30.5	14.5	34	19	25	50
T120-L12	hexagonal; indent	M12	12.8	28	16	18	40	50	30.5	14.5	34	19	25	50

T150-L

Range of cable cross section (flexible) [mm²] 150

Range of cable cross section (low stranded) [mm²] 150

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T150-L10	hexagonal; indent	M10	10.3	30	12	14	20	35	35	16.2	39	21	10	40
T150-L12	hexagonal; indent	M12	12.8	30	16	18	40	50	35	16.2	39	21	10	40

T185-L

Range of cable cross section (flexible) [mm²] 185

Range of cable cross section (low stranded) [mm²] 185

	Technical information	Weight and dimensions											Logistic
tipo	Crimping geometry	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]
T185-L10	hexagonal; indent	M10	10.3	33	12	14	20	35	37	18	41	23	10	40

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Panel plates type to print (select the Type from catalog)*

Panel plates type*

Panel plates color (select the color from catalog)*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colors (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note

T-L RING TERMINAL