Locomotives and coaches

1600

2A-2M

RING TERMINAL FOR HEAVY-DUTY APPLICATIONS, WITHOUT INSPECTION HOLE, WITH LONG NECK, TWO-HOLE CONNECTION, FOR COPPER CONDUCTORS

2A-2M/55º

RING TERMINALS FOR HEAVY DUTY APPLICATIONS, WITH TWO HOLES, FOR COPPER CONDUCTORS, BENT AT 55°

2A-M

HEAVY DUTY RING TERMINAL, WITHOUT INSPECTION HOLE, WITH LONG NECK, FOR COPPER CONDUCTORS

4300

IDT TOOL DIES

4320

INTERCHANGEABLE STRIPPING BLOCKS, FOR HB6 CALIPER

5116660250

MECHANICAL CABLE CUTTER, KT SERIES, FOR COPPER AND ALUMINUM CABLES WITH MAXIMUM DIAMETER 18 MM

5116660500

MECHANICAL CABLE CUTTER, KT SERIES, FOR COPPER AND ALUMINUM CABLES WITH MAXIMUM DIAMETER 25,4 MM

9.A

GROMMETS FOR SPLIT CABLE ENTRY SYSTEMS, IN TPE, TYPE SMALL

9.B

GROMMETS FOR SPLIT CABLE ENTRY SYSTEMS, IN TPE, TYPE LARGE

9000.10

SPLIT CABLE ENTRY SYSTEMS FOR PREDETERMINED CABLES, MADE IN GLASS-FIBRE REINFORCED POLYAMIDE PA6.6 WITH OVERMOULDED SEAL

9000.16

SPLIT CABLE ENTRY SYSTEMS FOR PREDETERMINED CABLES, MADE IN GLASS-FIBRE REINFORCED POLYAMIDE PA6.6 WITH OVERMOULDED SEAL

9000.24

SPLIT CABLE ENTRY SYSTEMS FOR PREDETERMINED CABLES, MADE IN GLASS-FIBRE REINFORCED POLYAMIDE PA6.6 WITH OVERMOULDED SEAL

9000.Q

SPLIT CABLE ENTRY SYSTEMS FOR PREDETERMINED CABLES, MADE IN GLASS-FIBRE REINFORCED POLYAMIDE PA6.6 WITH OVERMOULDED SEAL

9000.R

SPLIT CABLE ENTRY SYSTEMS FOR PREDETERMINED CABLES, MADE IN GLASS-FIBRE REINFORCED POLYAMIDE PA6.6 WITH OVERMOULDED SEAL

9005.D

BLINDPLUGS, IN PA6.6

9010

CLOSING PLATES, MADE OF GLASS-FIBRE REINFORCED POLYPROPYLENE

9010-SO

CLOSING PLATES, MADE OF GLASS-FIBRE REINFORCED POLYPROPYLENE

9020

PUSH-FIT MOUNTS, IN PA6.6

9100.M

CIRCULAR SPLIT CABLE ENTRY SYSTEMS FOR PREDETERMINED CABLES, MADE OF REINFORCED THERMOPLASTIC POLYMER WITH FIBREGLASS AND OVERMOULDED SEAL

9110

SPLIT BUSHING FOR CIRCULAR SPLIT CABLE ENTRY SYSTEMS, IN POLYAMIDE PA6

991559

A-2M

RING TERMINAL, TWO-HOLE CONNECTION, FOR COPPER CONDUCTORS

A-2M Angled

The 315° and 345° bent terminals of the A-2M series are made from electrolytic copper pipe of greater than 99.9% purity. Due to the process of annealing and electrolytic tinning, the connectors are easier to compress and more resistant to mechanical stress. The flap features a two-hole attachment to ensure maximum stability even under violent electrodynamic stress. The collar is provided with a chamfer and inspection hole to facilitate insertion of the conductor into the terminal and to avoid stretching of the elementary wires. The length of the collar is such as to facilitate the introduction of the terminal lug into the tool dies, thus simplifying wiring operations.

A-2M Contained palm