Categories > Cable lugs > Non-insulated > For copper cables >

A-M Contained palm RING TERMINAL WITH NARROW CONNECTION

RING TERMINAL WITH NARROW PALM, FOR COPPER CONDUCTORS, FOR LOW VOLTAGE CIRCUIT BREAKERS

Gallery

A-M CONTAINED PALM ring terminal with narrow connection (range-sx)

A-M CONTAINED PALM ring terminal with narrow connection (range-ft)

A-M Contained palm

RING TERMINAL WITH NARROW PALM, FOR COPPER CONDUCTORS, FOR LOW VOLTAGE CIRCUIT BREAKERS

Documentation

Instructions (pdf)

Certifications & approvals

UL (cULus)

Description

The A-M series content-attached terminals are made with electrolytic copper pipe of more than 99.9% purity. Due to the process of annealing and electrolytic tinning, the connectors are easier to compress and more resistant to mechanical stress. The flap features a contained attachment to allow connection to terminals of sizes not compatible with standard A-M terminals. The collar is provided with a chamfer and inspection hole to facilitate insertion of the conductor into the terminal and to prevent stretching of the elementary wires. The length of the collar is such that it facilitates the introduction of the lug into tool dies, thus simplifying wiring operations.

Read all Close

Common features in table.

Features

Details by type in expandable section below.

Technical information
Material composition and treatments
Classification and data ordering
Certifications

Minimum operating temperature

-50 °C

Maximum operating temperature

150 °C

Number of holes on the palm

Easy insertion input

Yes

Surface treatment

tin plating

Crimping geometry

hexagonal; indent

Conductor body material

Rame elettrolitico con purezza superiore al 99,95%

Annealing

Yes

Customs code

85369010

ROHS compliant

Yes

A-M Contained palm

	Technical information			Weight and dimensions													Logistic		Certifications
tipo	Spy hole	Range of cable cross section (flexible) [mm²]	Range of cable cross section (low stranded) [mm²]	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	UL standard
A2-M5/9	Yes	10	10	M5	5.3	9	6	6.5	20			26	8	4.6	9	6.8	100	1000	486A-486B
A3-M5/9	Yes	16	16	M5	5.3	9	6	6.5	24.5			29	11.5	5.8	13	7.9	100	1000	486A-486B
A5-M5/9	Yes	25	25	M5	5.3	9	6	6.5	25.5			31.5	10.5	7	12	10	100	500	486A-486B
A5-M6/11	Yes	25	25	M6	6.4	11	6	7	26	5	7	32	10.5	7	12	9.3	100	500	486A-486B
A5-M8/13.5	Yes	25	25	M8	8.4	13.5	8	9	28	10	20	36	10.5	7	12	9.3	100	500	486A-486B
A5-M10/14	Yes	25	25	M10	10.5	14	10	11	30	20	35	40	10.5	7	12	9.3	100	500	486A-486B
A7B-M6/11.5		25 - 35	35	M6	6.4	11.5	7	8	29.5	5	7	36.5	13	8.9	15	11.7	100	400	486A-486B
A7B-M8/14		25 - 35	35	M8	8.4	14	8	9	30.5	10	20	38.5	13.2	8.9	15	11.7	100	400
A10B-M6/11.5		35 - 50	50	M6	6.4	11.5	7	8	33.5	5	7	40.5	16.5	10	19	13	50	200	486A-486B
A10B-M8/14		35 - 50	50	M8	8.4	14	8	9	34.5	10	20	42.5	16.5	10	19	13	50	200
A14B-M6/11.5		50 - 70	70	M6	6.4	11.5	7	8	37	5	7	44	18	11.3	20	14.6	50	200	486A-486B
A14B-M8/15.5		50 - 70	70	M8	8.4	15.5	8	9	38	10	20	46	18	11.3	20	14.6	50	200
A19-M8/19	Yes	70 - 95	95	M8	8.4	19	8	9	44.5	10	20	52.5	22.5	13.5	25	17.5	25	100	486A-486B
A19B-M8/15.5		70 - 95	95	M8	8.4	15.5	8	9	44.5	10	20	52.5	22.5	13.5	25	17.5	25	100	486A-486B
A19-M10/19	Yes	70 - 95	95	M10	10.5	19	10	11	46.5	20	35	56.5	22.5	13.5	25	17.5	25	100	486A-486B
A24B-M8/19		95 - 120	120	M8	8.4	19	9	14	51	10	20	60	24.5	15.2	27	19.6	25	75	486A-486B
A24B-M10/19		59 - 120	120	M10	10.5	19	9	14	51	20	35	60	24.5	15.2	27	19.6	25	75	486A-486B
A30B-M8/19		120 - 150	150	M8	8.4	19	9	18	61	10	20	70	28.5	16.7	32	21.5	25	50	486A-486B
A30B-M10/19		120 - 150	150	M10	10.5	19	9	18	61	20	35	70	28.5	16.7	32	21.5	25	50	486A-486B
A37B-M10/24.5		150 - 185	185	M10	10.5	24.5	9	18	68	20	35	77	31.5	19.2	35	24.4	15	30	486A-486B
A37-M12/31	Yes	150 - 185	150	M12	13.2	31	12	16	68	40	50	80	29	19.2	32	24.4	15	30	486A-486B
A48-M10/31	Yes	185 - 240	240	M10	10.5	31	9	13	71	20	35	80	36	21.1	40	27.2	10	20	486A-486B
A48-M12/31	Yes	185 - 240	240	M12	13.2	31	12	16	74	40	50	86	36	21.1	40	27.2	10	20	486A-486B
A48-M16/31	Yes	185 - 240	240	M16	17	31	17	19	77	90	90	94	33	21.1	37	27.2	10	20	486A-486B
A60B-M10/31		240 - 300	300	M10	10.5	31	12	16	83	20	35	95	42	23.7	47	30.6	10	20	486A-486B
A60B-M12/31		240 - 300	300	M12	13.2	31	12	16	83	40	50	95	42	23.7	47	30.6	10	20	486A-486B
A80-M12/41	Yes	300 - 400	400	M12	13.2	41	19	22	94	40	50	113	44	27	49	35	5	15
A48B-M12/31		185 - 240	240	M12	13.2	31	12	14	67.5	40	50	79.5	36	21.1	40	27.2	15	30
A160B-M20S/61		630	800	M20	21	61	31.5	34	132		150	163.5	60	38	66	50	2	6

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Panel plates type to print (select the Type from catalog)*

Panel plates type*

Panel plates color (select the color from catalog)*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colors (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note