Categories > Cable lugs > Non-insulated > For aluminium cables >

AAD-M

Gallery

AAD-M

Description

Terminals type AAD..-M.. are made from Aluminium tube of a purity equal or greater than 99,5%. They are suitable for Aluminium conductors according to DIN EN 50182, up to 10 kV. All terminals are filled with a special grease that avoids Aluminium oxidation after crimping thereby assuring an optimal compression. Barrel is closed with a cap for storage and transport. Bright surface finish

Read all Close

Common features in table.

Features

Details by type in expandable section below.

Technical information
Material composition and treatments
Classification and data ordering

Minimum operating temperature

-50 °C

Maximum operating temperature

150 °C

Number of holes on the palm

Maximum operating voltage

10000 V

Grease inside the barrel

Yes

Crimping geometry

hexagonal

Conductor body material

Alluminio con purezza superiore al 99,5%

Customs code

85369010

AAD-M

	Technical information		Weight and dimensions													Logistic		Certifications
tipo tipo	Range of cable cross section (solid) [mm²] Range of cable cross section (solid) [mm²]	Range of cable cross section (stranded) [mm²] Range of cable cross section (stranded) [mm²]	Screw diameter Screw diameter	ØD [mm] ØD [mm]	B [mm] B [mm]	N [mm] N [mm]	M [mm] M [mm]	I [mm] I [mm]	Tightening torque (high conductivity screw) [nm] Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm] Tightening torque (8.8 grade screw) [nm]	L [mm] L [mm]	A [mm] A [mm]	Ø [mm] Ø [mm]	Cable stripping length [mm] Cable stripping length [mm]	Ø1 [mm] Ø1 [mm]	Unit in minimal packaging [pce] Unit in minimal packaging [pce]	Unit in standard packaging [pce] Unit in standard packaging [pce]	ROHS compliant ROHS compliant	Reference standard Reference standard
AAD16-M8	25	16	M8	8.4	18	11	13	52	10	20	52	32	5.8	36	12	50	200	Yes	DIN EN 50182
AAD16-M10	25	16	M10	10.5	18	11	13	52	20	35	52	32	5.8	36	12	50	200	Yes	DIN EN 50182
AAD25-M8	35	25	M8	8.4	19	11	13	60	10	20	71	37	6.8	41	12	50	100	Yes	DIN EN 50182
AAD25-M10	35	25	M10	10.5	19	11	13	60	20	35	71	37	6.8	41	12	50	100	Yes	DIN EN 50182
AAD35-M8	50	35	M8	8.4	21	11	15	67	10	20	78	42	8	47	14	35	70	Yes	DIN EN 50182
AAD35-M10	50	35	M10	10.5	21	11	15	67	20	35	78	42	8	47	14	35	70	Yes	DIN EN 50182
AAD35-M12	50	35	M12	13	23	14	15	67	40	50	81	42	8	47	14	35	70	Yes	DIN EN 50182
AAD50-M8	70	50	M8	8.4	25	11	18	72	10	20	83	42	9.8	47	16	30	60	Yes	DIN EN 50182
AAD50-M10	70	50	M10	10.5	25	11	18	72	20	35	83	42	9.8	47	16	30	60	Yes	DIN EN 50182
AAD50-M12	70	50	M12	13	25	14	18	72	40	50	86	42	9.8	47	16	30	60	Yes	DIN EN 50182
AAD70-M10	95	70	M10	10.5	28	11	18	83	20	35	94	52	11.2	58	18.5	15	60	Yes	DIN EN 50182
AAD70-M12	95	70	M12	13	28	14	18	83	40	50	97	52	11.2	58	18.5	15	60	Yes	DIN EN 50182
AAD70-M16	95	70	M16	17	28	17	18	83	90	90	100	52	11.2	58	18.5	15	60	Yes	DIN EN 50182
AAD95-M10	120	95	M10	10.5	32	11	18	90	20	35	101	55	13.2	61	22	10	20	Yes	DIN EN 50182
AAD95-M12	120	95	M12	13	32	14	18	90	40	50	104	55	13.2	61	22	10	20	Yes	DIN EN 50182
AAD95-M16	120	95	M16	17	34	17	18	90	90	90	107	55	13.2	61	22	10	20	Yes	DIN EN 50182
AAD120-M10	150	120	M10	10.5	32	11	18	91	20	35	102	55	14.7	61	23	10	20	Yes	DIN EN 50182
AAD120-M12	150	120	M12	13	32	14	18	91	40	50	105	55	14.7	61	23	10	20	Yes	DIN EN 50182
AAD120-M16	150	120	M16	17	34	17	18	91	90	90	108	55	14.7	61	23	10	20	Yes	DIN EN 50182
AAD150-M10	185	150	M10	10.5	35	11	20	104	20	35	115	60	16.5	66	25	8	16	Yes	DIN EN 50182
AAD150-M12	185	150	M12	13	35	14	20	104	40	50	118	60	16.5	66	25	8	16	Yes	DIN EN 50182
AAD150-M16	185	150	M16	17	35	17	20	104	90	90	121	60	16.5	66	25	8	16		DIN EN 50182
AAD150-M20	185	150	M20	21	41	20	20	104		150	124	60	16.5	66	25	8	16	Yes	DIN EN 50182
AAD185-M12	240	185	M12	13	40	14	20	105	40	50	119	60	18.3	66	28.5	15	15	Yes	DIN EN 50182
AAD185-M16	240	185	M16	17	40	17	20	105	90	90	122	60	18.3	66	28.5	15	15	Yes	DIN EN 50182
AAD185-M20	240	185	M20	21	40	20	20	105		150	125	60	18.3	66	28.5	15	15		DIN EN 50182
AAD240-M12	300	240	M12	13	45	14	24	119	40	50	133	70	21	77	32	6	12	Yes	DIN EN 50182
AAD240-M16	300	240	M16	17	45	17	24	119	90	90	136	70	21	77	32	12	12	Yes	DIN EN 50182
AAD240-M20	300	240	M20	21	45	20	24	119		150	139	70	21	77	32	12	12	Yes	DIN EN 50182
AAD300-M12	300	300	M12	13	49	14	25	125	40	50	139	70	23.3	77	34	9	9	Yes	DIN EN 50182
AAD300-M16	300	300	M16	17	49	17	25	125	90	90	142	70	23.3	77	34	9	9	Yes	DIN EN 50182
AAD300-M20	300	300	M20	21	49	20	25	125		150	145	70	23.3	77	34	9	9		DIN EN 50182
AAD400-M12	400	400	M12	13	55	14	25	165	40	50	179	100	26	110	38.5	3	9	Yes	DIN EN 50182
AAD400-M16	400	400	M16	17	55	17	25	165	90	90	182	100	26	110	38.5	3	9	Yes	DIN EN 50182
AAD400-M20	400	400	M20	21	55	20	25	165		150	185	100	26	110	38.5	3	9		DIN EN 50182
AAD500-M12	500	500	M12	13	63	14	25	165	90	90	179	100	29	110	44	3	9
AAD500-M16	500	500	M16	17	63	17	25	165	90	90	182	100	29	110	44	3	9	Yes	DIN EN 50182
AAD500-M20	500	500	M20	21	63	20	25	165		150	185	100	29	110	44	3	9		DIN EN 50182

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colors (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note

AAD-M

AAD-M

Common features in table.

Follow us

Thank you, your request has been send successfully

Print label service

1. User data

2. Company data

3. Print type

4. Label specs

5. Graphic specs

6. Request data

Thank you, your request has been send successfully

AAD-M

AAD-M

Common features in table.

Follow us

Thank you, your request has been send successfully

Print label service

1. User data

2. Company data

3. Print type

4. Label specs

5. Graphic specs

6. Request data

Thank you, your request has been send successfully

You might be interested

No results