Categories > 电力接头 > 预绝缘 > 冷压套环端子 >

F-M 眼罩

吊耳，预绝缘聚氯乙烯，用于铜导线

Gallery

F-M

吊耳，预绝缘聚氯乙烯，用于铜导线

Certifications & approvals

UL (cULus)

Description

F 系列电缆挂耳由纯度超过 99.9 % 的电解铜带制成。由于采用了退火和电解镀锡工艺，连接器更容易压缩，抗机械应力能力更强。套圈内部的滚花改善了与导体的接触，提高了整体抗拉强度。由于内部形状呈漏斗状，绝缘护套便于将导体插入接线片，并防止基本导线拉伸，从而缩短了接线时间。

Read all Close

Common features in table.

Features

Details by type in expandable section below.

技术信息
材质和处理
包装信息
类别和数据排列
认证

最低工作温度

-20 °C

最高工作温度

75 °C

短时运行温度阈值

90 °C

接环孔数量

绝缘类型

部分

存在快接入口

是的

表面处理

镀锡

压接的几何形态

径向

导体材质

电解铜纯度99.95%以上

绝缘套材质

聚氯乙烯 PVC

退火

是的

最小包装单元

100 PCE

海关编码

85369010

UL94标准下的灭弧等级

RF-M

绝缘套颜色红色

电缆截面范围 [mm²] 0.25 ÷ 1.5

	重量和尺寸															包装信息	认证
tipo	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	标准包装单位 [pce]	符合ROHS标准	EN 45545-2认证 (r22)	EN 45545-2认证 (r23)	参考标准	UL 标准
RF-M2	M2	2.2	5.6	2.8	4.5	8.7			17.3	4.2	10.1	4	5.5	1.8	5	3000	Yes
RF-M3	M3	3.2	5.6	2.8	4.5	8.7	0.5	0.5	17.3	4.2	10.1	4	5.5	1.8	5	3000	Yes
RF-M3.5	M3.5	3.7	5.6	2.8	4.5	8.7			17.3	4.2	10.1	4	5.5	1.8	5	3000	Yes
RF-M3.5/1	M3.5	3.7	6.2	3.1	7.1	11.3			20.2	4.2	10.1	4	5.5	1.8	5	3000	Yes
RF-M4	M4	4.3	7	3.5	6.5	10.7			20	4.2	10.1	4	5.5	1.8	5	3000	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
RF-M4/3	M4	4.3	7.8	3.9	7.1	11.3			21	4.2	10.1	4	5.5	1.8	5	3000	Yes
RF-M5	M5	5.3	7.8	3.9	7.1	11.3			21	4.2	10.1	4	5.5	1.8	5	2500	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
RF-M6	M6	6.4	9.4	4.7	8.1	12.3	5	7	22.8	4.2	10.1	4	5.5	1.8	5	2500	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
RF-M6/1	M6	6.4	12	6	10.3	14.5	5	7	26.3	4.2	10.1	4	5.5	1.8	5	2000	Yes
RF-M7	M7	7.2	9.4	4.7	8.1	12.3			22.8	4.2	10.1	4	5.5	1.8	5	2500	Yes
RF-M8	M8	8.4	12	6	10.3	14.5	10	20	26.3	4.2	10.1	4	5.5	1.8	5	2000	Yes
RF-M10	M10	10.5	15.5	7.75	13.05	17.25	20	35	30.8	4.2	10.1	4	5.5	1.8	5	1500	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
RF-M12	M12	13	18	9	15.5	19.7	40	50	34.5	4.2	10.1	4	5.5	1.8	5	1500	Yes

BF-M

绝缘套颜色蓝色

电缆截面范围 [mm²] 1.5 ÷ 2.5

	重量和尺寸															包装信息	认证
tipo	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	标准包装单位 [pce]	符合ROHS标准	EN 45545-2认证 (r22)	EN 45545-2认证 (r23)	参考标准	UL 标准
BF-M2	M2	2.2	5.6	2.8	5	9.2			17.9	4.2	10.1	4.9	6.4	2.4	5	3000	Yes
BF-M3	M3	3.2	5.6	2.8	5	9.2	0.5	0.5	17.9	4.2	10.1	4.9	6.4	2.4	5	2500	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
BF-M3.5	M3.5	3.7	5.6	2.8	5	9.2			17.9	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BF-M3.5/1	M3.5	3.7	6.2	3.1	6.5	10.7			19.7	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BF-M4	M4	4.3	8	4	6.5	10.7			20.6	4.2	10.1	4.9	6.4	2.4	5	2500	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
BF-M5	M5	5.3	8	4	7.5	11.7			21.6	4.2	10.1	4.9	6.4	2.4	5	2000	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
BF-M6	M6	6.4	9.4	4.7	8.6	12.8	5	7	23.4	4.2	10.1	4.9	6.4	2.4	5	2000	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
BF-M6/1	M6	6.4	12	6	10.3	14.5	5	7	26.4	4.2	10.1	4.9	6.4	2.4	5	2000	Yes
BF-M6/2	M6	6.4	8.4	4.2	5.4	9.6	5	7	19.7	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BF-M7	M7	7.2	10	5	7.8	12			22.9	4.2	10.1	4.9	6.4	2.4	5	2000	Yes
BF-M8	M8	8.4	12	6	10.3	14.5	10	20	26.4	4.2	10.1	4.9	6.4	2.4	5	1500	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
BF-M10	M10	10.5	15.5	7.75	13.05	17.25	20	35	30.9	4.2	10.1	4.9	6.4	2.4	5	1500	Yes
BF-M12	M12	13	18	9	15.5	19.7	40	50	34.6	4.2	10.1	4.9	6.4	2.4	5	1000	Yes

GF-M

绝缘套颜色黄色

电缆截面范围 [mm²] 4 ÷ 6

	重量和尺寸															包装信息	认证
tipo	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	标准包装单位 [pce]	符合ROHS标准	EN 45545-2认证 (r22)	EN 45545-2认证 (r23)	参考标准	UL 标准
GF-M3	M3	3.2	8	4	8.1	14.5	0.5	0.5	26.2	8	14.1	6.6	8.1	3.6	7	1000	Yes
GF-M3.5	M3.5	3.7	8	4	8.1	14.5			26.2	8	14.1	6.6	8.1	3.6	7	1000	Yes
GF-M4	M4	4.3	9	4.5	8.1	14.5			26.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GF-M5	M5	5.3	9	4.5	8.1	14.5			26.7	8	14.1	6.6	8.1	3.6	7	1000	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
GF-M6	M6	6.4	11	5.5	11.1	17.5	5	7	30.7	8	14.1	6.6	8.1	3.6	7	1000	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
GF-M6/1	M6	6.4	11	5.5	8.1	14.5	5	7	27.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GF-M7	M7	7.2	11	5.5	11.1	17.5			30.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GF-M8	M8	8.4	13.6	6.8	12.1	18.5	10	20	33	8	14.1	6.6	8.1	3.6	7	800	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B; UL 486C	UL486A-486B
GF-M8/1	M8	8.4	11	5.5	8.1	14.5	10	20	27.8	8	14.1	6.6	8.1	3.6	7	1000	Yes
GF-M10	M10	10.5	13.6	6.8	12.1	18.5	20	35	33	8	14.1	6.6	8.1	3.6	7	800	Yes
GF-M10/1	M10	10.5	15.5	7.75	13.85	20.25	20	35	35.7	8	14.1	6.6	8.1	3.6	7	800	Yes
GF-M12	M12	13	19	9.5	15.1	21.5	40	50	38.7	8	14.1	6.6	8.1	3.6	7	500	Yes
GF-M14	M14	15	21	10.5	16.1	22.5	65	70	40.7	8	14.1	6.6	8.1	3.6	7	500	Yes
GF-M16	M16	17	24	12.5	17.1	23.5	90	90	43.2	8	14.1	6.6	8.1	3.6	7	500	Yes

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Panel plates type to print (select the Type from catalog)*

Panel plates type*

Panel plates color (select the color from catalog)*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colors (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note

F-M 眼罩