Categories > 电力接头 > 预绝缘 > 冷压套环端子 >

P-M 眼罩

孔眼式电缆插头，预绝缘聚碳酸酯，用于铜导线，无卤素

Gallery

P-M

孔眼式电缆插头，预绝缘聚碳酸酯，用于铜导线，无卤素

Certifications & approvals

UL (cULus)

Description

P 系列电缆挂耳由纯度超过 99.9% 的电解铜带制成。由于采用了退火和电解镀锡工艺，连接器更容易压缩，抗机械应力能力更强。绝缘外套由聚碳酸酯制成，这是一种无卤热塑性材料，其特殊的分子结构保证了理想的韧性。绝缘护套的漏斗状内部形状便于将导体插入电缆线耳中，并可防止基本导线拉伸，从而缩短接线时间。

Read all Close

Common features in table.

Features

Details by type in expandable section below.

技术信息
材质和处理
包装信息
类别和数据排列
认证

最低工作温度

-20 °C

最高工作温度

115 °C

短时运行温度阈值

130 °C

接环孔数量

绝缘类型

部分

存在快接入口

是的

表面处理

镀锡

最高工作电压

1000 V

压接的几何形态

径向

导体材质

电解铜纯度99.95%以上

绝缘套材质

聚碳酸酯

退火

是的

不含卤素

是的

最小包装单元

100 PCE

海关编码

85369010

UL94标准下的灭弧等级

VP-M

绝缘套颜色绿色

电缆截面范围 [mm²] 0.2 ÷ 0.5

	重量和尺寸															包装信息	认证
tipo	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	标准包装单位 [pce]	符合ROHS标准	EN 45545-2认证 (r22)	EN 45545-2认证 (r23)	参考标准	UL 标准
VP-M2	M2	2.2	5.6	2.8	4.5	8.7			17.3	4.6	10	3	4.4	1.2	5	4000	Yes
VP-M3	M3	3.2	5.6	2.8	4.5	8.7	0.5	0.5	17.3	4.6	10	3	4.4	1.2	5	4000	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B	UL486A-486B
VP-M3.5	M3.5	3.7	5.6	2.8	4.5	8.7			17.3	4.6	10	3	4.4	1.2	5	4000	Yes
VP-M4	M4	4.3	7	3.5	6.5	10.7			20.3	4.6	10	3	4.4	1.2	5	4000	Yes
VP-M5	M5	5.3	7.8	3.9	7.1	11.3			21	4.6	10	3	4.4	1.2	5	4000	Yes
VP-M6	M6	6.4	9.4	4.7	8.1	12.3	5	7	21.8	4.6	10	3	4.4	1.2	5	4000	Yes

RP-M

绝缘套颜色红色

电缆截面范围 [mm²] 0.25 ÷ 1.5

	重量和尺寸															包装信息	认证
tipo	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	标准包装单位 [pce]	符合ROHS标准	EN 45545-2认证 (r22)	EN 45545-2认证 (r23)	参考标准	UL 标准
RP-M2	M2	2.2	5.6	2.8	4.5	8.7			17.4	4.2	10.1	4	5.5	1.8	5	3000	Yes
RP-M3	M3	3.2	5.6	2.8	4.5	8.7	0.5	0.5	17.4	4.2	10.1	4	5.5	1.8	5	3000	Yes
RP-M3.5	M3.5	3.7	5.6	2.8	4.5	8.7			17.4	4.2	10.1	4	5.5	1.8	5	3000	Yes	HL2 [R22]	HL3 [R23]	UL 486A-486B	UL486A-486B
RP-M3.5/1	M3.5	3.7	6.2	3.1	7.1	11.3			20.2	4.2	10.1	4	5.5	1.8	5	3000	Yes
RP-M4	M4	4.3	7	3.5	6.5	10.7			20.1	4.2	10.1	4	5.5	1.8	5	3000	Yes
RP-M4/3	M4	4.3	7.8	3.9	7.1	11.3			21.1	4.2	10.1	4	5.5	1.8	5	3000	Yes
RP-M5	M5	5.3	7.8	3.9	7.1	11.3			21.1	4.2	10.1	4	5.5	1.8	5	2500	Yes
RP-M6	M6	6.4	9.4	4.7	8.1	12.3	5	7	22.9	4.2	10.1	4	5.5	1.8	5	2500	Yes
RP-M6/1	M6	6.4	12	6	10.3	14.5	5	7	26.4	4.2	10.1	4	5.5	1.8	5	2000	Yes
RP-M7	M7	7.2	9.4	4.7	8.1	12.3			22.9	4.2	10.1	4	5.5	1.8	5	2500	Yes
RP-M8	M8	8.4	12	6	10.3	14.5	10	20	26.4	4.2	10.1	4	5.5	1.8	5	2500	Yes
RP-M10	M10	10.5	15.5	7.75	13.05	17.25	20	35	30.9	4.2	10.1	4	5.5	1.8	5	1500	Yes
RP-M12	M12	13	18	9	15.5	19.7	40	50	34.6	4.2	10.1	4	5.5	1.8	5	1500	Yes

BP-M

绝缘套颜色蓝色

电缆截面范围 [mm²] 1.5 ÷ 2.5

	重量和尺寸															包装信息	认证
tipo	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	标准包装单位 [pce]	符合ROHS标准
BP-M2	M2	2.2	5.6	2.8	5	9.2			17.9	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BP-M3	M3	3.2	5.6	2.8	5	9.2	0.5	0.5	17.9	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BP-M3.5	M3.5	3.7	5.6	2.8	5	9.2			17.9	4.2	10.1	4.9	6.4	2.4	5	3000	Yes
BP-M3.5/1	M3.5	3.7	6.2	3.1	6.5	10.7			19.7	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BP-M4	M4	4.3	8	4	6.5	10.7			20.6	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BP-M5	M5	5.3	8	4	7.5	11.7			21.6	4.2	10.1	4.9	6.4	2.4	5	2000	Yes
BP-M6	M6	6.4	9.4	4.7	8.6	12.8	5	7	23.4	4.2	10.1	4.9	6.4	2.4	5	2000	Yes
BP-M6/1	M6	6.4	12	6	10.3	14.5	5	7	26.4	4.2	10.1	4.9	6.4	2.4	5	2000	Yes
BP-M6/2	M6	6.4	8.4	4.2	5.4	9.6	5	7	19.7	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BP-M7	M7	7.2	10	5	7.8	12			22.9	4.2	10.1	4.9	6.4	2.4	5	2500	Yes
BP-M8	M8	8.4	12	6	10.3	14.5	10	20	26.4	4.2	10.1	4.9	6.4	2.4	5	1500	Yes
BP-M10	M10	10.5	15.5	7.75	13.05	17.25	20	35	30.9	4.2	10.1	4.9	6.4	2.4	5	1500	Yes
BP-M12	M12	13	18	9	15.5	19.7	40	50	34.6	4.2	10.1	4.9	6.4	2.4	5	1000	Yes

GP-M

绝缘套颜色黄色

电缆截面范围 [mm²] 4 ÷ 6

	重量和尺寸															包装信息	认证
tipo	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	标准包装单位 [pce]	符合ROHS标准	参考标准	UL 标准
GP-M3	M3	3.2	8	4	8.1	14.5	0.5	0.5	26.2	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M3.5	M3.5	3.7	8	4	8.1	14.5			26.2	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M4	M4	4.3	9	4.5	8.1	14.5			26.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M5	M5	5.3	9	4.5	8.1	14.5			26.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M6	M6	6.4	11	5.5	11.1	17.5	5	7	30.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M6/1	M6	6.4	11	5.5	8.1	14.5	5	7	27.7	8	14.1	6.6	8.1	3.6	7	1000	Yes	UL 486A-486B	UL486A-486B
GP-M7	M7	7.2	11	5.5	11.1	17.5			30.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M8	M8	8.4	13.6	6.8	12.1	18.5	10	20	33	8	14.1	6.6	8.1	3.6	7	800	Yes
GP-M8/1	M8	8.4	11	5.5	8.1	14.5	10	20	27.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M10	M10	10.5	13.6	6.8	12.1	18.5	20	35	33	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M10/1	M10	10.5	15.5	7.75	13.85	20.25	20	35	35.7	8	14.1	6.6	8.1	3.6	7	1000	Yes
GP-M12	M12	13	19	9.5	15.1	21.5	40	50	38.7	8	14.1	6.6	8.1	3.6	7	500	Yes
GP-M14	M14	15	21	10.5	16.1	22.5	65	70	40.7	8	14.1	6.6	8.1	3.6	7	500	Yes
GP-M16	M16	17	24	12	17.1	23.5	90	90	43.2	8	14.1	6.6	8.1	3.6	7	500	Yes

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Panel plates type to print (select the Type from catalog)*

Panel plates type*

Panel plates color (select the color from catalog)*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colors (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note

P-M 眼罩