Categories > 电力接头 > 预绝缘 > 冷压套管端子 >

ANE-M Fine stranded 眼罩

眼形接线片，预绝缘 PA 6.6，用于 5 级和 6 级柔性铜导线

Gallery

ANE-M Fine stranded

眼形接线片，预绝缘 PA 6.6，用于 5 级和 6 级柔性铜导线

Description

ANE-M 系列电缆耳由纯度超过 99.9% 的电解铜管制成。它们是连接极为柔软的 5 级和 6 级 CEI 20-29 铜电缆的理想选择。由于采用了退火和电解镀锡工艺，连接器更容易压缩，抗机械应力能力更强。 PA 6.6 绝缘护套简化了电缆绝缘的安装和修复。绝缘护套的漏斗状内部形状便于将导体插入接线片，并可防止基本导线拉伸，从而缩短接线时间。

Read all Close

Common features in table.

Features

Details by type in expandable section below.

技术信息
材质和处理
类别和数据排列

最低工作温度

-20 °C

最高工作温度

115 °C

短时运行温度阈值

130 °C

存在指示灯孔

是的

接环孔数量

绝缘套颜色

黑色

绝缘类型

部分

存在快接入口

是的

表面处理

镀锡

兼容的电缆等级

5 and 6 class, CEI 20-29

导体材质

电解铜纯度99.95%以上

退火

是的

海关编码

85369010

ANE9-M

电缆截面范围 (extra flexible) [mm²] 35

	技术信息	重量和尺寸															包装信息		认证
tipo	压接的几何形态	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	最小包装单元 [pce]	标准包装单位 [pce]	符合ROHS标准	EN 45545-2认证 (r22)	EN 45545-2认证 (r23)
ANE9-M6/15	缩进; 径向	M6	6.4	15	7	8	31.5	5	7	54	16.5	30.3	13.6	15.5	9.3	19	50	150	Yes	HL2 [R22]	HL2 [R23]
ANE9-M8	缩进; 径向	M8	8.4	17	8	9	32.5	10	20	56	16.5	30.3	13.6	15.5	9.3	19	50	150	Yes
ANE9-M10	缩进; 径向	M10	10.5	18.5	10	11	34.5	20	35	60	16.5	30.3	13.6	15.5	9.3	19	50	150	Yes
ANE9-M12	缩进; 径向	M12	13.2	21	12	14	37.5	40	50	65	16.5	30.3	13.6	15.5	9.3	19	50	150	Yes

ANE12-M

电缆截面范围 (extra flexible) [mm²] 50

	技术信息	重量和尺寸															包装信息		认证
tipo	压接的几何形态	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	最小包装单元 [pce]	标准包装单位 [pce]	符合ROHS标准	EN 45545-2认证 (r22)	EN 45545-2认证 (r23)
ANE12-M6/15	缩进; 径向	M6	6.4	15	7	8	33.5	5	7	59.5	16	35.8	15.7	18	11	18	25	50	Yes	HL2 [R22]	HL2 [R23]
ANE12-M8	缩进; 径向	M8	8.4	19.8	8	9	34.5	10	20	61.5	16	35.8	15.7	18	11	18	25	50	Yes
ANE12-M10	缩进; 径向	M10	10.5	19.8	10	11	36.5	20	35	65.5	16	35.8	15.7	18	11	18	25	50	Yes
ANE12-M10/19	缩进; 径向	M10	10.5	19	10	11	36.5	20	35	65.5	16	35.8	15.7	18	11	18	25	50	Yes
ANE12-M12	缩进; 径向	M12	13.2	22	12	14	39.5	40	50	70.5	16	35.8	15.7	18	11	18	25	50	Yes

ANE17-M

电缆截面范围 (extra flexible) [mm²] 70

	技术信息	重量和尺寸															包装信息		认证
tipo	压接的几何形态	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	最小包装单元 [pce]	标准包装单位 [pce]	符合ROHS标准
ANE17-M6	缩进; 径向	M6	6.4	23	7	8	38	5	7	63.8	20	40	17.9	20.4	13	22	25	50	Yes
ANE17-M8	缩进; 径向	M8	8.4	23	8	9	39	10	20	65.8	20	40	17.9	20.4	13	22	25	50	Yes
ANE17-M10	缩进; 径向	M10	10.5	23	10	11	41	20	35	69.8	20	40	17.9	20.4	13	22	25	50	Yes
ANE17-M10/19	缩进; 径向	M10	10.5	19	10	11	41	20	35	69.8	20	40	17.9	20.4	13	22	25	100	Yes
ANE17-M12	缩进; 径向	M12	13.2	23	12	14	44	40	50	74.8	20	40	17.9	20.4	13	22	25	50	Yes
ANE17-M14	缩进; 径向	M14	15	25	12	15.5	45.5	65	70	76.3	20	40	17.9	20.4	13	22	25	50	Yes
ANE17-M16	缩进; 径向	M16	17	27	13.5	16.5	46.5	90	90	78.8	20	40	17.9	20.4	13	22	25	50	Yes

ANE20-M

电缆截面范围 (extra flexible) [mm²] 95

	技术信息	重量和尺寸															包装信息		认证
tipo	压接的几何形态	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	最小包装单元 [pce]	标准包装单位 [pce]	符合ROHS标准
ANE20-M8	缩进; 径向	M8	8.4	27	8	9	42	10	20	70.6	23	42.6	20	22.7	15	26	25	50	Yes
ANE20-M10	缩进; 径向	M10	10.5	27	10	11	44	20	35	74.6	23	42.6	20	22.7	15	26	25	50	Yes
ANE20-M12	缩进; 径向	M12	13.2	27	12	14	47	40	50	79.6	23	42.6	20	22.7	15	26	25	50	Yes
ANE20-M14	缩进; 径向	M14	15	27	12	15.5	48.5	65	70	81.1	23	42.6	20	22.7	15	26	25	50	Yes
ANE20-M16	缩进; 径向	M16	15	27	13.5	16.5	49.5	90	90	83.6	23	42.6	20	22.7	15	26	25	50	Yes

ANE29-M

电缆截面范围 (extra flexible) [mm²] 120

	技术信息	重量和尺寸															包装信息		认证
tipo	压接的几何形态	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	最小包装单元 [pce]	标准包装单位 [pce]	符合ROHS标准
ANE29-M10	缩进; 径向	M10	10.5	30	10	11	47.5	20	35	81.5	23	48	22.4	25.5	16.5	26	15	30	Yes
ANE29-M12	缩进; 径向	M12	13.2	30	12	14	50.5	40	50	86.5	23	48	22.4	25.5	16.5	26	15	30	Yes
ANE29-M14	缩进; 径向	M14	15	30	12	15.5	52	65	70	88.5	23	48	22.4	25.5	16.5	26	25	50	Yes
ANE29-M16	缩进; 径向	M16	17	30	13.5	16.5	53	90	90	90.5	23	48	22.4	25.5	16.5	26	25	50	Yes
ANE29-M20	缩进; 径向	M20	21	30	20	22	58.5		150	102.5	23	48	22.4	25.5	16.5	26	20	40	Yes

ANE35-M

电缆截面范围 (extra flexible) [mm²] 150

	技术信息	重量和尺寸															包装信息		认证
tipo	压接的几何形态	螺栓直径	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	紧固扭矩（建议值？UL?) (高导电螺钉) [nm]	紧固扭矩（建议值？UL?) (8.8级螺钉) [nm]	L [mm]	A [mm]	C [mm]	Ø2 [mm]	Ø3 [mm]	Ø [mm]	电缆剥皮长度 [mm]	最小包装单元 [pce]	标准包装单位 [pce]	符合ROHS标准
ANE35-M12	缩进; 径向	M12	13.2	34.2	14	14	57.5	40	50	95	20	50	25	28	19.2	22	15	30	Yes
ANE35-M14	缩进; 径向	M14	15	34.2	16	15.5	59.5	65	70	99	20	50	25	28	19.2	22	15	30	Yes
ANE35-M16	缩进; 径向	M16	17	34.2	17	16.5	60.5	90	90	101	20	50	25	28	19.2	22	15	30	Yes
ANE35-M20	缩进; 径向	M20	21	34.2	20	22	63.5		150	107	20	50	25	28	19.2	22	15	30	Yes

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Panel plates type to print (select the Type from catalog)*

Panel plates type*

Panel plates color (select the color from catalog)*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colors (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note

ANE-M Fine stranded 眼罩

ANE-M Fine stranded

Common features in table.

Follow us

Thank you, your request has been send successfully

Print label service

1. User data

2. Company data

3. Print type

4. Label specs

5. Graphic specs

6. Request data

Thank you, your request has been send successfully

ANE-M Fine stranded 眼罩

ANE-M Fine stranded

Common features in table.

Follow us

Thank you, your request has been send successfully

Print label service

1. User data

2. Company data

3. Print type

4. Label specs

5. Graphic specs

6. Request data

Thank you, your request has been send successfully

You might be interested

No results