Electrical and automation equipment

2021

ENTRY BUSHES, BRASS, GAS THREAD

357

36

MULTI-ENTRY SEALS FOR CABLE GLANDS, NEOPRENE 70sh A

A-2M Contained palm

AA-M

MONOMETAL RING TERMINAL, FOR ALUMINUM CONDUCTORS

ANE-M

RING TERMINAL, PRE-INSULATED WITH PA 6.6, FOR COPPER CONDUCTORS

ANL

POLYESTER ALPHANUMERIC LABEL

CA-2M

RING TERMINAL FOR MEDIUM VOLTAGE, 2 HOLES, FOR COPPER CONDUCTORS

CMB2N

Jaws

ETF-ROLL-SBS

TIE-ON CABLE TAGS, PRE-CUT, WITHOUT HOLDER, STYRENE-BUTADIENE-STYRENE, WITHOUT HOLDER, HALOGEN FREE

G

CABLE TIE, IN POLYAMIDE PA6.6

HR-45N

RING TERMINAL, 45° BEND, FOR COPPER CONDUCTORS

HRS-N

KM-ROLL-PO

ADHESIVE CABLE MARKERS, PRE-CUT, ON ROLL, IN POLYOLEFIN, SILICONE FREE, HALOGEN FREE

MG-CPM

MG-CPM terminal block markers are available in versions to suit the particular clip formats of the most widely used products. Depending on type, markers are presented as joined strips at a set or flexible pitch or as separate markers for convenient individual insertion on mixed pitch terminal block assemblies. MG-CPM markers provide an elevated mechanical robustness, high dimensional stability and are Halogen Free. Printing a complete sheet of MG-CPM markers on MARKINGENIUS® thermal transfer printers takes around 10 seconds, while to optimise application time, additional data - job details, location, etc - may be printed on the stems. Part-used sheets are easily accommodated to avoid wastage. MG-CPM terminal block markers are available in versions to suit the particular clip formats of the most widely used products.

MG-KMP

ADHESIVE CABLE MARKERS, ON SHEETS, PRE-CUT, IN POLYOLEFIN, SILICONE FREE, HALOGEN FREE

MG-TAP-HF

TAGES FOR CABLES AND COMPONENTS, PRE-CUT, POLYCARBONATE, HALOGEN FREE

MG-TPMF

CABLE TAGS, FLAT SERIES, PRE-CUT, FOR PMF HOLDERS, RIGID PVC

MG-VRT-A

ADHESIVE PANEL PLATES, PRE-CUT, RIGID PVC

MG-VRT-AH

ADHESIVE PANEL PLATES WITH HOLES, PRE-CUT, RIVETABLE, RIGID PVC

MG-VRT-AH-HF

ADHESIVE PANEL PLATES WITH HOLES, PRE-CUT, RIVETABLE, POLYCARBONATE, HALOGEN FREE

MG-VRT-R

PANEL PLATES, PRE-CUT, RIGID PVC

MG-VRT-R-HF

PANEL PLATES, PRE-CUT, POLYCARBONATE, HALOGEN FREE

MG-VYT

ADHESIVE LABELS, IN PVC FILM, PRE-CUT, FOR OUTSIDE OF PANEL

MG2-TCT