Categories > Cable lugs > Non-insulated > For copper cables >

A-M Contained palm RING TERMINAL WITH NARROW CONNECTION

RING TERMINAL WITH NARROW CONNECTION, FOR COPPER CONDUCTORS, FOR LOW VOLTAGE CIRCUIT BREAKERS

Gallery

A-M CONTAINED PALM ring terminal with narrow connection (range-sx)

A-M CONTAINED PALM ring terminal with narrow connection (range-ft)

A-M Contained palm

RING TERMINAL WITH NARROW CONNECTION, FOR COPPER CONDUCTORS, FOR LOW VOLTAGE CIRCUIT BREAKERS

Documentation

Instructions (pdf)

Certifications & approvals

UL (cULus)

Description

This range of terminals features contained palm width and has been specifi cally developed for application on L.V. circuit breakers with reduced space terminal blocks. The contained palm width allows an immediate and easier installation. CEMBRE terminals are manufactured from electrolytic Copper tube with a purity greater than 99.9%. The specifi cally designed section of the barrel and the choice of principal dimensions are optimising the best combination of mechanical strength and electrical conductivity. These terminals are annealed to guarantee optimum ductility and are electrolytically Tin plated to avoid oxidation. The barrel is provided with an internal taper to ease the introduction of the conductor; furthermore, its length grants a comfortable and correct positioning between dies, during crimping operations. Each palm is marked with the CEMBRE logo and part number.

Read all Close

Common features in table.

Features

Details by type in expandable section below.

Technical information
Material composition and treatments
Classification and data ordering
Certifications

Minimum operating temperature

-50 °C

Maximum operating temperature

150 °C

Number of holes on the palm

Easy insertion input

Yes

Surface treatment

tin plating

Crimping geometry

hexagonal; indent

Conductor body material

Rame elettrolitico con purezza superiore al 99,95%

Customs code

85369010

ROHS compliant

Yes

A-M Contained palm

	Technical information			Material composition and treatments	Weight and dimensions													Logistic		Certifications
tipo	Spy hole	Range of cable cross section (flexible) [mm²]	Range of cable cross section (low stranded) [mm²]	Annealing	Screw diameter	ØD [mm]	B [mm]	N [mm]	M [mm]	I [mm]	Tightening torque (high conductivity screw) [nm]	Tightening torque (8.8 grade screw) [nm]	L [mm]	A [mm]	Ø [mm]	Cable stripping length [mm]	Ø1 [mm]	Unit in minimal packaging [pce]	Unit in standard packaging [pce]	Reference standard	UL standard
A2-M5/9	Yes	10	10	Yes	M5	5.3	9	6	6.5	20			26	8	4.6	9	6.8	100	1000	UL 486A-486B	UL486A-486B
A3-M5/9	Yes	16	16	Yes	M5	5.3	9	6	6.5	24.5			29	11.5	5.8	13	7.9	100	1000	UL 486A-486B	UL486A-486B
A5-M5/9	Yes	25	25	Yes	M5	5.3	9	6	6.5	25.5			31.5	10.5	7	12	10	100	500	UL 486A-486B	UL486A-486B
A5-M6/11	Yes	25	25	Yes	M6	6.4	11	6	7	26	5	7	32	10.5	7	12	9.3	100	500	UL 486A-486B	UL486A-486B
A5-M8/13.5	Yes	25	25	Yes	M8	8.4	13.5	8	9	28	10	20	36	10.5	7	12	9.3	100	500	UL 486A-486B	UL486A-486B
A5-M10/14	Yes	25	25	Yes	M10	10.5	14	10	11	30	20	35	40	10.5	7	12	9.3	100	500	UL 486A-486B	UL486A-486B
A7B-M6/11.5		25 - 35	35	Yes	M6	6.4	11.5	7	8	29.5	5	7	36.5	13	8.9	15	11.7	100	400	UL 486A-486B	UL486A-486B
A7B-M8/14		25 - 35	35	Yes	M8	8.4	14	8	9	30.5	10	20	38.5	13.2	8.9	15	11.7	100	400
A10B-M6/11.5		35 - 50	50	Yes	M6	6.4	11.5	7	8	33.5	5	7	40.5	16.5	10	19	13	50	200	UL 486A-486B	UL486A-486B
A10B-M8/14		35 - 50	50	Yes	M8	8.4	14	8	9	34.5	10	20	42.5	16.5	10	19	13	50	200	UL 486A-486B
A10B-M8/16.5		35 - 50	50	Yes	M8	8.4	16.5	8	9	34.5	10	20	42.5	16.5	10	19	13	50	200	UL 486A-486B
A14B-M6/11.5		50 - 70	70	Yes	M6	6.4	11.5	7	8	37	5	7	44	18	11.3	20	14.6	50	200	UL 486A-486B	UL486A-486B
A14B-M8/15.5		50 - 70	70	Yes	M8	8.4	15.5	8	9	38	10	20	46	18	11.3	20	14.6	50	200
A14B-M8/16.5		50 - 70	70	Yes	M8	8.4	16.5	8	9	38	10	20	46	18	11.3	20	14.6	50	200
A19-M8/19	Yes	70 - 95	95	Yes	M8	8.4	19	8	9	44.5	10	20	52.5	22.5	13.5	25	17.5	25	100		UL486A-486B
A19B-M8/15.5		70 - 95	95	Yes	M8	8.4	15.5	8	9	44.5	10	20	52.5	22.5	13.5	25	17.5	25	100	UL 486A-486B	UL486A-486B
A19-M10/19	Yes	70 - 95	95	Yes	M10	10.5	19	10	11	46.5	20	35	56.5	22.5	13.5	25	17.5	25	100		UL486A-486B
A24B-M8/19		95 - 120	120	Yes	M8	8.4	19	9	14	51	10	20	60	24.5	15.2	27	19.6	25	75	UL 486A-486B	UL486A-486B
A24B-M10/19		59 - 120	120	Yes	M10	10.5	19	9	14	51	20	35	60	24.5	15.2	27	19.6	25	75	UL 486A-486B	UL486A-486B
A30B-M8/19		120 - 150	150	Yes	M8	8.4	19	9	18	61	10	20	70	28.5	16.7	32	21.5	25	50	UL 486A-486B	UL486A-486B
A30B-M10/19		120 - 150	150	Yes	M10	10.5	19	9	18	61	20	35	70	28.5	16.7	32	21.5	25	50	UL 486A-486B	UL486A-486B
A37-M10/31	Yes	150 - 185	150	Yes	M10	10.5	31	9	13	65	20	35	74	29	19.2	32	24.4	15	30	UL 486A-486B
A37B-M10/24.5		150 - 185	185	Yes	M10	10.5	24.5	9	18	68	20	35	77	31.5	19.2	35	24.4	15	30	UL 486A-486B	UL486A-486B
A37-M12/31	Yes	150 - 185	150	Yes	M12	13.2	31	12	16	68	40	50	80	29	19.2	32	24.4	15	30	UL 486A-486B	UL486A-486B
A48-M10/31	Yes	185 - 240	240	Yes	M10	10.5	31	9	13	71	20	35	80	36	21.1	40	27.2	10	20	UL 486A-486B	UL486A-486B
A48-M12/31	Yes	185 - 240	240	Yes	M12	13.2	31	12	16	74	40	50	86	36	21.1	40	27.2	10	20	UL 486A-486B	UL486A-486B
A48-M16/31	Yes	185 - 240	240	Yes	M16	17	31	17	19	77	90	90	94	33	21.1	37	27.2	10	20	UL 486A-486B	UL486A-486B
A60B-M10/31		240 - 300	300	Yes	M10	10.5	31	12	16	83	20	35	95	42	23.7	47	30.6	10	20	UL 486A-486B	UL486A-486B
A60B-M12/31		240 - 300	300	Yes	M12	13.2	31	12	16	83	40	50	95	42	23.7	47	30.6	10	20	UL 486A-486B	UL486A-486B
A60-M12/39	Yes	240 - 300	300	Yes	M12	13.2	39	14	20	85	40	50	99	40	23.7	44	30.6	10	20	UL 486A-486B	UL486A-486B
A80-M12/41	Yes	300 - 400	400	Yes	M12	13.2	41	19	22	94	40	50	113	44	27	49	35	5	15	UL 486A-486B
A48B-M12/31		185 - 240	240	Yes	M12	13.2	31	12	14	67.5	40	50	79.5	36	21.1	40	27.2
A160B-M20S/61		630	800		M20	21	61	31.5	34	132		150	163.5	60	38	66	50

Subscribe to CEMBRE newsletter and stay tuned

Name*

Last name*

Country*

City*

Company

E-mail*

Privacy acceptance - I declare that I have read and understood in all its parts the privacy information listed in this page (web, applicants, customers & suppliers), according to Art. 13 of the GDPR 679/16. 13. I am aware of my ability to provide or withdraw my consent for the use of my data. * *

Marketing consent - I consent to the processing of my data to receive information on initiatives or events that may interest me. *

Print label service

Fill in the form and follow the instructions to request the label print service

1. User data

Name*

Last name*

E-mail*

2. Company data

Company*

VAT*

Country*

Province*

Country*

Zip code*

City*

Address*

Address 2*

Phone number

3. Print type

4. Label specs

Labels Type to print (Type from catalog)*

Labels type*

Panel plates type to print (select the Type from catalog)*

Panel plates type*

Panel plates color (select color from catalog)*

Orientation

Horizontal

Vertical

Label size

x B

5. Graphic specs

Graphic size

x W

Graphic position

x Y

Graphic colours (Pantone, RAL, CMYK)*

Vector gaphic file (*.ai, *.cdr, *.dxf)*

Select file

I want to receive a sample of TAG

6. Request data

Requested quantity*

Annual need

Note